浇注机故障检测之温度损失问题。为了提高浇注机保温效果，一味加厚炉衬，可惜效果不佳。解决这个浇注机故障的方法如下：首先优化浇注机结构设计，将包盖分为半固定包盖和活动包盖，尽量减少活动包盖面积，减少活动包盖的热量损失。而半固定包盖由于平时不必打开，只有当维修时才需要打开，可以做得厚重一些，保温效果好一些。其次是浇注机炉衬分为两层，内层是耐火材料层，外层是绝热层，绝热层虽然不厚，但是保温效果非常好。一般采用这种结构的浇注机，可以将温度损失控制在每分钟2℃以内。
1. Temperature loss of pouring machine fault detection. In order to improve the heat preservation effect of the pouring machine, the furnace lining is thickened, but the effect is not good. The solution to the problem of the pouring machine is as follows: first, optimize the structural design of the pouring machine, divide the cover into semi fixed cover and movable cover, reduce the area of the movable cover as much as possible, and reduce the heat loss of the movable cover. Because the semi fixed cover does not need to be opened at ordinary times, it needs to be opened only when it is under maintenance. It can be made heavier and has better heat preservation effect. Secondly, the lining of the pouring machine is divided into two layers, the inner layer is the refractory layer, and the outer layer is the thermal insulation layer. Although the thermal insulation layer is not thick, the thermal insulation effect is very good. Generally, the pouring machine with this structure can control the temperature loss within 2 ℃ per minute.
2.浇注机故障检测之滴漏的问题定网站建设  伺服液位仪  防撞墙模具 唐山护栏 遮阳网 风电基础模具。解决底注式浇注机常常滴漏的问题实际上非常简单，浇注机的塞杆除了塞紧以外，还会旋转一下拧紧，这样可以大大减少浇注机滴漏现象。
2. Leakage of pouring machine fault detection. In fact, it is very simple to solve the problem of drip leakage in the bottom pouring pouring machine. In addition to the plug rod of the pouring machine, it can also rotate and tighten once, which can greatly reduce the drip leakage phenomenon of the pouring machine.